High-speed chemical fiber granulation machine

Type 200 chemical fiber high-speed granulator is a kind of waste thermoplastic film and wall thickness of less than 2 mm of products for direct granulation equipment, it can be soft PVC, high and low pressure polyethylene, polystyrene, polypropylene and other thermoplastic waste products or films for granulation, can also be foaming polystyrene waste products for granulation.
After the waste is put into the machine pot, the cutting action of the high-speed rotating cutting edge and fixed cutting edge makes the material quickly cut into pieces, and the chopped material or piece flows along the wall of the pot under the centrifugal force of the turntable, while the material is affected by the slurry Flip, from all around to the center of the pot movement, due to the high-speed friction between the material itself and friction with the wall of the pot and blade produced a large amount of frictional heat, so that the material temperature quickly rose to a semi-plastic state, glued to each other into small pieces, before the material will be blocked, All pre-prepared quantitative water is sprayed into the material, cold water encounters hot material, rapid gasification, take away the material surface heat, so that the material surface cools sharply to prevent clumps, and then through the crushing between the cutting edge and the cutting edge to make it chopped into particles (irregularly sized particles). During the shredding process, appropriate pigments can also be added as needed for coloring.
The granules produced by this machine can be directly used for extruders, injection machines, for more stringent requirements of the products can also be first extruded granulation machine and then plasticized, granulation after use.
Key technical parameters: