High-speed blender, mixer
Ruiquan company specializes in the production: plastic mixer Plastic mixer, PVC plastic mixer, TPR plastic blender, PE color master mixer, plastic particle blender, PP plastic mixer, plastic particle mixer. In fact, in various industries called different just, in fact, called plastic mixer, because this is a product designed for the plastic industry, mainly used in plastic color mixing, the reason is called plastic mixer.
Plastic particle mixer use 1. Used in the plastic industry for plastic particle mixing, so that different plastics mix evenly, the use of a gear motor, and so that the plastic particle mixer in the process of mixing does not produce material dissolution, volatilization or deterioration.
The barrel body is three-dimensional, made of stainless steel, with vertical stirring blades, which stand on the reducer. 3. Rewind reducer, located at the bottom, when working by the device in the seat of the motor belt transmission worm to drive the mixing barrel in the stirring blades clockwise rotation, so that the material discharge at once. 4. The seat and motor device are a whole structure, the motor is installed in the bottom of the barrel zui low, the motor directly drives the stirring blades, to maintain the transmission power. 5. The box is to control the movement of the machine, it is located in front of the right, the drive of the machine slot can be moulded mixer "on" "down" button, note that the two can not be both.
Plastic particle mixer maintenance instructions 1. Regular inspection of the machine parts, 1-2 times a month, check the project for worms, bearings, shaft seals and other activities of the parts of the flexible rotation and wear, found defects should be repaired in time for normal use. 2. Electrical control parts, should be kept clean, sensitive, found faults should be repaired in a timely manner. 3. When the use is complete or stopped, the remaining material should be removed from the plastic particle mixer and the residual powder of each part of the machine should be cleared. If the deactivation time is long, the machine must be wiped clean and covered with a poop. 4. When the mixing paddles of the plastic particle mixer are installed, they should be lightly removed, stabilized and lightly placed to avoid deformation and damage. Features: 1. Four-wheeled upright design, small size, easy to move. 2. With swing needle wheel gear reduction motor, low noise, durable. 3. Complete uniform mixing in a short period of time, low energy consumption, high efficiency. 4. Barrel cover, barrel bottom stamping molding, with precision, more durable. 5. The timer can select the mixing time between 0-30 minutes. 6. All stainless steel blades, structural science, reasonable, in the work can be fully stirred raw materials, and reduce the load to zui small, save time, 7. save electricity;
1. Barrel blades are made of stainless steel, easy to clean and avoid rust;
2. Four-wheeled upright, small size, easy to move;
3. With swing needle wheel motor, low noise, holding less durable;
4. Complete uniform mixing in a short period of time, low energy consumption, high efficiency;
5. Barrel cover, barrel bottom stamping molding, with precision, more durable;
6. Chain safety protection devices to ensure the safety of operators and machinery and equipment;
7. Mixing time can be selected between 0 and 30 minutes.
