Low-speed blender:
Alias: mixer, mixer Model: Multiple Brands: Ruiquan Machinery Application: Plastic rubber
Power Type: Electric Style: Horizontal Material type: dry powder, paste Type of stirring: multi-function blender
Plastic mixer Plastic mixer, PVC plastic mixer, TPR plastic blender, PE color master mixer, plastic particle blender, PP plastic mixer, plastic particle mixer. In fact, in various industries called different just, in fact, called plastic mixer, because this is a product designed for the plastic industry, mainly used in plastic color mixing, the reason is called plastic mixer.
Plastic particle mixer use 1: Plastic particle mixer, used in the plastic industry for plastic particle mixing, so that different plastics mix evenly, the use of a gear motor, and so that the plastic particle mixer in the process of mixing does not produce material dissolution, volatilization or deterioration. The barrel body is three-dimensional, made of stainless steel, with vertical stirring blades, which stand on the reducer. 3. Rewind reducer, located at the bottom, when working by the device in the seat of the motor belt transmission worm to drive the mixing barrel in the stirring blades clockwise rotation, so that the material discharge at once. 4. The seat and motor device are a whole structure, the motor is installed at the bottom of the barrel, the motor directly drives the stirring blades, to maintain the transmission power. 5. The box is to control the movement of the machine, it is located in front of the right, the drive of the machine slot can be moulded mixer "on" "down" button, note that the two can not be both.
Plastic particle mixer maintenance instructions 1. Regular inspection of the machine parts, 1-2 times a month, check the item for the worm, bearings, shaft seals and other activities of the parts of the flexible rotation and wear, found that defects should be repaired in time for normal use. 2. Electrical control parts, should be kept clean, sensitive, found faults should be repaired in a timely manner. 3. When the use is complete or downtime, the remaining material should be removed from the plastic particle mixer and the residual powder of each part of the machine should be cleared. If the deactivation time is long, the machine must be wiped clean and covered with a poop. 4. The mixing paddle of the plastic particle mixer should be lightly removed, stabilized and lightly placed to avoid deformation and damage. peculiarity: 1. Choose the mixing time between four and 30 minutes.
Technical parameters wheel upright design, small size, easy to move. 2. With swing needle wheel gear reduction motor, low noise, durable. 3. Complete uniform mixing in a short period of time, low energy consumption, high efficiency. 4. Barrel cover, barrel bottom stamping molding, with , more durable. 5. The timer can select the mixing time between 0-30 minutes. 6. All stainless steel blades, scientific and reasonable structure, in the work can be fully stirred raw materials, and reduce the load to a small, time-saving, 7. Power saving, the use of high-quality stainless steel materials, high strength, easy cleaning.
