Mixer, mixer,
Plastic horizontal processing machine structure features 1, the overall seat, the structure is strong, smooth operation, mixing blades and material contacts are made of stainless steel, has good corrosion resistance, to maintain the quality and clean material, do not change color. 2, the transmission mechanism using worm wheel, worm direct transmission, use without loud noise, and have enough oil storage, can get good lubrication. Plastic horizontal processing mechanism construction note 1, reducer is the main transmission structure of the mixer, it is located on the left side of the machine, the operation of the electric motor in the landline by the triangular belt transmission worm, worm wheel, with 1:40 deceleration to drive the blender. The snail axle is hollow and equipped with a fixed key, which allows the mixing paddles of the plastic horizontal mixer to be freely disassembled. The top of the reducer is equipped with 2 ring screws for removal and installation. The end cap is equipped with a screw for high-speed mixing paddle positioning, has been adjusted at the factory, generally in use no longer need to adjust. 2, the machine groove for the U-shaped body, made of stainless steel, the interior mixing blades, lying horizontally on the reducer and rewind reducer. 3, the reducer for the control of the positioning angle of the mixing tank, it is located on the left side of the plastic mixing mixer, operating by the device in the engine seat of the electric motor through the triangular belt transmission worm, worm wheel, driving the mixing groove in a certain angle range rotation, so that mixed material one-time discharge. 4, the overall structure, the motor mounted on both sides of the machine seat on the active board, the motor can be adjusted with screws, so that the triangle belt to get a certain degree of tension, to maintain transmission power. 5, the control box is to control the movement of the machine, located in front of the right side, the drive of the machine slot can be pressed plastic horizontal mixing machine slot "on" "down" button, pay attention to both can not be at the same time. Plastic horizontal processing machine parts lubrication The lubrication of the reducer is oil-immersed and its oil storage must be kept on the oil marker line and the oil must be kept clean. If the frequent use of plastic horizontal color mixer must be changed every three months of new oil, replacement should be removed and cleaned, should be added to the new oil.
